Help - Search - Members - Calendar
Full Version: What year is the wiring harness?
914World.com > The 914 Forums > 914World Garage
Jett
Does anyone know what year this harness is for?

https://www.ebay.com/itm/Porsche-914-Hauptk...4.c100667.m2042
GregAmy
Likely not possible to tell without a part number.

There was not a significant difference among the years.

Spendy money, but a nice find.
Jett
The seller also has a set of NOS hubcaps for a 356 in the boxes.

I am hoping Jeff can tell what the harness is for... they have two
mepstein
I would buy it in a second if I knew it was an early harness.
GregAmy
What's the difference between early and late?
mepstein
QUOTE(GregAmy @ May 25 2020, 12:46 PM) *

What's the difference between early and late?

Lots of small differences in every year but early didn’t have seat belt interlock or center console. Different plugs for steering harness.
porschetub
Hell for that price just buy,that is cheap.
windforfun
Could be a Pandora's Box if it's not what you need. Go for it if your old harness is that bad.
ejm
I think it is for a '70. In the area of the fuse box relay sockets there are two double red wires with ring connectors. These went to the plastic junction block near the fuse box that was only used thru '72. Near the forward part of the harness is a 12 pole connector housing used only in '70. The 12 pole connector doesn't seem quite seem to be in the right place but it may just be the way the harness is laid out. In '71 this was changed to a 14 pole connector and '72 and up had flat connectors for the switches on the column.

Click to view attachment
Click to view attachment
IronHillRestorations
If I wasn't paring down my parts hoard, I'd buy it. It's a better investment than the market.
RiqueMar
Maaaaaaaan, where was this 4, 5, 6-years ago. headbang.gif
mepstein
idea.gif
raynekat
I bought one of these for my 71 restomod project.
It wasn't cheap, but it was NOS and in very nice shape.
There were a couple of misplaced wires in one of the connectors that I had to rearrange.

https://www.aasesales.com/products/f1n-1053...60e30&_ss=r

Very nice wiring harnesses will tend to be expensive.
There is a lot that goes into them.
All the color coded (and striped) wiring that is so hard to find.
Specialty connectors, etc.
IronHillRestorations
QUOTE(raynekat @ May 25 2020, 07:29 PM) *

I bought one of these for my 71 restomod project.
It wasn't cheap, but it was NOS and in very nice shape.
There were a couple of misplaced wires in one of the connectors that I had to rearrange.

https://www.aasesales.com/products/f1n-1053...60e30&_ss=r

Very nice wiring harnesses will tend to be expensive.
There is a lot that goes into them.
All the color coded (and striped) wiring that is so hard to find.
Specialty connectors, etc.


I've been asked about four times in the last 12 months if I can make a chassis harness, and my answer is NO! I wish I could, but @raynekat has it nailed
Jett
Looks like someone bought it smile.gif
mepstein
QUOTE(Jett @ May 26 2020, 01:15 PM) *

Looks like someone bought it smile.gif

shades.gif
Jett
QUOTE(mepstein @ May 26 2020, 10:28 AM) *

QUOTE(Jett @ May 26 2020, 01:15 PM) *

Looks like someone bought it smile.gif

shades.gif

lol good for you! Now will someone sell me a 914-6 please smile.gif
mepstein
QUOTE(Jett @ May 26 2020, 01:36 PM) *

QUOTE(mepstein @ May 26 2020, 10:28 AM) *

QUOTE(Jett @ May 26 2020, 01:15 PM) *

Looks like someone bought it smile.gif

shades.gif

lol good for you! Now will someone sell me a 914-6 please smile.gif

I do appreciate you pointing it out to me. I've wanted one for a while. I don't care too much which year as long as it's early. It's going to get a 914-6 ignition so the steering connection wasn't important.
RiqueMar
QUOTE(mepstein @ May 26 2020, 10:54 AM) *

I do appreciate you pointing it out to me. I've wanted one for a while. I don't care too much which year as long as it's early. It's going to get a 914-6 ignition so the steering connection wasn't important.


Adding to this discord, does anyone know where to purchase the 2-housings (12 pin) needed for the steering column to harness connection? I have the pins, wires, and components, but need the housings.
Jett
QUOTE(mepstein @ May 26 2020, 10:54 AM) *

QUOTE(Jett @ May 26 2020, 01:36 PM) *

QUOTE(mepstein @ May 26 2020, 10:28 AM) *

QUOTE(Jett @ May 26 2020, 01:15 PM) *

Looks like someone bought it smile.gif

shades.gif

lol good for you! Now will someone sell me a 914-6 please smile.gif

I do appreciate you pointing it out to me. I've wanted one for a while. I don't care too much which year as long as it's early. It's going to get a 914-6 ignition so the steering connection wasn't important.

Happy to help!
Niklas
Ok i bought it.

I think it is an early harness.
mepstein
Showed up today. Harness feels like it was made yesterday. Wires are all soft and flexible.
dr914@autoatlanta.com
70 71


QUOTE(Jett @ May 25 2020, 08:43 AM) *

Does anyone know what year this harness is for?

https://www.ebay.com/itm/Porsche-914-Hauptk...4.c100667.m2042
Niklas
QUOTE(Niklas @ Jun 5 2020, 10:12 AM) *

Ok i bought it.

I think it is an early harness.


I think mine is 1972 or 1973.


Niklas
mepstein
QUOTE(Niklas @ Jun 11 2020, 02:47 PM) *

QUOTE(Niklas @ Jun 5 2020, 10:12 AM) *

Ok i bought it.

I think it is an early harness.


I think mine is 1972 or 1973.


Niklas

I'm pretty sure there is a couple differences between 72-73, the big one being the seat belt circuit.
dr914@autoatlanta.com
There are many differences in the different harnesses including european ones

QUOTE(mepstein @ Jun 11 2020, 11:52 AM) *

QUOTE(Niklas @ Jun 11 2020, 02:47 PM) *

QUOTE(Niklas @ Jun 5 2020, 10:12 AM) *

Ok i bought it.

I think it is an early harness.


I think mine is 1972 or 1973.


Niklas

I'm pretty sure there is a couple differences between 72-73, the big one being the seat belt circuit.

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.